Muut paineilmatyökalut
-
215,00 €BETA TOOLS 1922P1-1/4 REV. RATCHET WITH HAMMER FACE
Reversible air impact ratchet
High torque without affecting wrist
68 Nm
• "Double rocking dog" impulse device
• Easy tightening: The impact mechanism system eliminates wrist twisting at end of screwing and shortens operating time
• Compact and powerful: maximum torque is significantly higher than maximum torque as achieved with a conventional ratchet
• Ergonomic rubber handle
Free speed 700 rpm
Maximum torque 68 Nm
Bolt capacity Cl 8.8 M1016 mm
Bolt capacity Cl 12.9 M813 mm
Air inlet 1/4" GAS
Working pressure 6.2 bar
Internal hose size (Ø) 10 mm
Mean air consumption 88 l/min
Weight 0.6 kg Lue lisää...
-
215,00 €BETA TOOLS 1922P2-3/8 REV. RATCHET WITH HAMMER FACE
Reversible air impact ratchet
High torque without affecting wrist
68 Nm
• "Double rocking dog" impulse device
• Easy tightening: The impact mechanism system eliminates wrist twisting at end of screwing and shortens operating time
• Compact and powerful: maximum torque is significantly higher than maximum torque as achieved with a conventional ratchet
• Ergonomic rubber handle
Free speed 700 rpm
Maximum torque 68 Nm
Bolt capacity Cl 8.8 M1016 mm
Bolt capacity Cl 12.9 M813 mm
Air inlet 1/4" GAS
Working pressure 6.2 bar
Internal hose size (Ø) 10 mm
Mean air consumption 88 l/min
Weight 0.6 kg Lue lisää...
-
342,00 €BETA TOOLS 1922P3-1/2 REV. RATCHET WITH HAMMER FACE
Reversible air impact ratchet
High torque without affecting wrist
136 Nm
• "Double rocking dog" impulse device
• Easy tightening: The impact mechanism system eliminates wrist twisting at end of screwing and shortens operating time
• Compact and powerful: maximum torque is significantly higher than maximum torque as achieved with a conventional ratchet
• Ergonomic rubber handle
Free speed 600 rpm
Maximum torque 136 Nm
Bolt capacity Cl 8.8 M1218 mm
Bolt capacity Cl 12.9 M1016 mm
Air inlet 1/4" GAS
Working pressure 6.2 bar
Internal hose size (Ø) 10 mm
Mean air consumption 113 l/min
Weight 1.5 kg Lue lisää...
-
298,00 €BETA TOOLS 1944A-AXIAL NEEDLE SCALER Axial needle scaler • Allows needles to come out as much as needed by changing scaler tube position • Suitable for removing rust and paint • Axial design allows access to small spaces • Fitted with 19 needles (Ø 3 mm) • Can be used with 29-needle kit (Ø 2 mm) Strokes per minute 3.800 Stroke length 33 mm N°. of needles 19 Needle size (Ø) 3 mm Air inlet 1/4" GAS Working pressure 6.2 bar Internal hose size (Ø) 10 mm Mean air consumption 85 l/min
2.8 kg Lue lisää...
-
39,00 €BETA TOOLS 1944AR 2-29 NEEDLES Set of 29 needles Ø 2 mm for needle scalers 1944N and 1944A Lue lisää... -
29,00 €Beta 1944AR 3 Set of 19 needles Ø 3 mm for needle scalers 1944N and 1944A Lue lisää... -
379,00 €BETA TOOLS 1944N-NEEDLE SCALER Needle scaler • Suitable for removing rust, paint and welding slags from metal surfaces • The independently moving steel needles allow access to any kind of fissure, which is necessary for removing mud, lime and concrete from building equipment • Exhaust through handle • Fitted with 19 needles (Ø 3 mm) • Can be used with a 28-needle kit (Ø 2 mm) Strokes per minute 3800 Stroke length 33 mm N°. of needles 19 Needle size (Ø) 3 mm Air inlet 1/4" GAS Working pressure 6.2 bar Internal hose size (Ø) 8 mm Mean air consumption 85 l/min Weight 2.7 kg Lue lisää... -
43,00 €BETA TOOLS 1944PA 2-NEEDLE HOLDER Needle holder for needles Ø 2 mm Needle plates for items 1944N and 1944A Lue lisää... -
32,00 €BETA TOOLS 1944PA 3-NEEDLE HOLDER Needle plates for items 1944N and 1944A Lue lisää... -
210,00 €BETA TOOLS 1945C-PNEUMATIC FIXER Stapler, nailer, combo tool For type 90 staples - B12 type round-headed nails • Rubber coated handle • Lightweight aluminium body • Air exhaust can be rotated 360 degrees • Safety device on tip • Jam clearing mechanism • Fields of use: building wood frames and packing cases, applying coatings and insulating materials, fixing skirting boards and glazing frames. • Uses staples type 90, section 1.25 x 1.0 mm (18-Gauge), length 16 - 40 mm, width 5.8 mm • Uses round-headed nails type B12, section 1.25 x 1.0 mm (18-Gauge), length 15 - 50 mm, 1.9-mm head Magazine capacity 100 pcs Air inlet 1/4" GAS Working pressure 5 - 8 bar Internal hose size (Ø) 8 mm Air consumption (7 bar) 1.12 l/cycle Weight 1.16 kg Lue lisää...
Instagram